Unique DIY Wooden Light Bulbs icon

Unique DIY Wooden Light Bulbs

7.1 for Android
8.7 |
484 Reviews
41 Posts

The description of Unique DIY Wooden Light Bulbs

We've been always fascinated with the warmth of wood and the brightness of light. The combination of those two can give only a beautiful effect. A project can be made in many ways. Some people feel more confident using power tools while others prefer the traditional way. in this application will share you step by step to make DIY Wooden Light Bulbs.

Step 1: Tools and Materials

Tools are just a matter of taste! Have fun and always be careful when working with sharp tools and power tools!

Materials: Wood (any species would do), Led strip (14.4W, 12V DC), Led power supply (100-240V AC, 50/60HZ, Output:12VDC, 2.0A), Cable, Wood files or rasp, Wood glue, Sandpaper 80 and 120 grit, Connector strip


Band saw or jig saw, Router, Rabbet bit, Nail gun or some 25mm nails, Hammer, Miter saw, 6mm and 16mm drill bits, Jig saw, Soldering, iron kit, screwdriver, Drill

Step 2: Making the Bulbs

Print out the provided plan and transfer the bulb shape on the wooden blocks. You can just transfer the shape using a pencil like we did but you can also print the plan three times and use spray adhesive to stick each plan on each block.

Step 3: The Base

You need to make a base from which you will hang the lamps. This is a base which can be mounted on the wall or on the roof. Now drill three 6mm holes, one in the middle of the base and two more, 5cm from each side of the base. You are going to feed the wire through those holes.

Step 4: Preparing the Bulbs for Wiring

On each bulb drill a 6mm hole all the way through the bottom of the bulb to feed the wire. Then from the inside drill a 16mm hole, just 3cm deep. We are going to hide the wire knot in this hole.

Step 5: Soldering

Cut a piece of led strip to fit inside the bulb. Then cut a long piece of cable (around 1m) and solder the cable on the led strip.

Finally make a knot to the cable near the led strip as shown on the pics.

Step 6: Connecting the Cables

Feed the cable through the hole on the bulb and stick the led strip in the narrow channel you made with the router. At this point you can determine how long you want your cable to be. Once you decide the cable length make a knot to the cable to prevent it from slipping off the base,or disconnect.

Use a connector strip as shown on the pics to connect all the positive wires to the positive end of your power supply, and all the negative wires to the negative end.

Want to know more ?
Download this application now and get what you want here. worth to try and you will like it.
simply share through any social media platforms. thank you for downloading. please enjoy and give us any feedback.
Show More

Black Desert Mobile Tags

Popular Apps In Last 24 Hours