Pretty Bridal Earrings Tutorial7.1 for Android
The description of Pretty Bridal Earrings Tutorial
Needle nose pliers, Jewellery wire cutters,
Gold-filled headpins, Earring fishhooks, crystal bicone beads, teardrop beads, crystalized glass round beads, Gold and crystal round beads, Plastic earring backs, Gold jump rings.
Step 1: Create the First Beaded Headpin
Take one headpin, and slide the largest crystal drop bead over the top, down to the base.
Step 2: Add the Gold and Crystal Bead
Take the gold and crystal round bead, and slide it over the headpin.
Step 3: Add the Crystal Bicone Beads
Next, slide the small crystal bicone beads over the headpin.
Step 4: Create the Second Beaded Headpin
Slide the crystal teardrop bead to the bottom of the headpin.
Step 5: Add the Silver Crystal Glass Bead
Slide the silver crystal glass bead all the way down the headpin.
Step 6: Slide on the Crystal Bicone Beads
Add three of the small bicone beads.
Step 7: Make the Third Headpin Sequence
Now we will make the third headpin sequence in the same as we created the second headpin.
Step 8: Add the Silver Glass Bead
Slide the silver glass bead on to the headpin, so it rests upon the teardrop bead.
Step 9: Slide on the Crystal Bicone Beads
As demonstrated in the previous steps, add the three small bicone beads to rest on top of the silver bead.
Step 10: Cut and Loop the First Headpin
Take your wire cutters and snip the end of the first headpin. Remember to leave some space.
Step 11: Cut the Second and Third Headpins
Cut the second and third pins. These headpins should be the same length, but they should also be slightly shorter than the first headpin.
Step 12: Loop the Wire of the Second Headpin
Once your headpins are cut, loop the wire once again. Take the pliers and squeeze firmly around the end of the head pin.
Step 13: Loop the Third Headpin
Loop the wire of the third headpin as demonstrated in previous steps. All three headpins should now have the loops.
Step 14: Add the Jump Ring
Hold the ends of the jump ring with both sets of pliers. Twist the pliers away from each other in opposite directions to open the jump ring.
Step 15: Add the Headpins
With the jump rings open, add the headpins. Add a short headpin, then the centre longest headpin, and then the last short headpin.
Step 16: Place the Fishhook
Now slide the fishhook over the jump ring.
Step 17: Close the Jump Ring
Place both sets of pliers on opposite ends of the jump rings. Now twist the pliers towards each other and this will close the jump ring
Step 18: Slide On the Plastic Earring Back
The earring back is a tiny plastic piece that slides onto the fishhook and secures the earring to your ear. Take this small plastic piece and slide it up to the centre of the fishhook. Now your first earring is complete!
for further information, download this now and grab what you want.
please enjoy this Pretty Bridal Earrings Tutorial and give us any feedback.
Black Desert Mobile Tags
Get it on:
HAGO - Play With New Friends
Microsoft Outlook: Organize Your Email & Calendar
First Touch Games Ltd.
Samsung Smart Switch Mobile
Samsung Electronics Co., Ltd.
Fate/Grand Order (English)
World War Heroes
Azur Interactive Games Limited