Creative Zig Zag Window Cornice icon

Creative Zig Zag Window Cornice

7.1 for Android
6.2 |
249 Reviews
|
77 Posts

The description of Creative Zig Zag Window Cornice

Create this custom window cornice in an afternoon. For a pulled together look consider using a favorite tablecloth to cover the cornice or match the fabric with your chairs.,

Completion time – 4 hours

Materials
STYROFOAM Brand Foam

Sheets, 36" x 12" x 1", two
Other Materials

Fabric, to cover cornice frame (our fabric
measured 54" x 36")
Quilt batting, 36" x 12" (optional)
Wood picks or toothpicks

Tools
Serrated knife or dental floss
Candle stub
Sharp pencil
Yardstick or ruler
Scissors
Straight pins
U-pins
Thick, white craft glue
Low-temp glue gun and glue sticks
(optional)
Iron and ironing board (optional)
Angle brackets with screws, 5", two
Instructions
Finished Size: 36" wide, 12" tall, 7" deep

(Note: The window shown is 34" across, and the cornice
measures 36" wide and 12" tall. If your window measurements
vary, adjust the sizes accordingly. For windows wider than
36", glue two sheets together along the 12" edges, joining
them with thick, white craft glue and wood picks or
toothpicks; u-pins inserted between the pieces will help
enhance the bond. Let glue dry completely before moving on to
the cornice construction.)

instructions:
1. Save one 36" x 12" foam sheet for front of cornice. Measure
two, 12" x 6" pieces on second foam sheet; score lines with
pencil. These will be side pieces. Wax serrated knife with
candle stub, and cut pieces from foam sheet. Or, try dental
floss: stand the sheet on its edge, and hold a 20" length of
dental floss along the scored line, positioning one hand at
the bottom of the board and the other at the top; draw the
dental floss down through the foam sheet along the scored line.

2. Refer to Fig. 1 to join sides to front. Place glue on three
wood picks, and insert into 12" edge of side piece. Using
thick, white craft glue or low temperature glue gun, join side
to front. Repeat with second side. Let dry completely.
3. If using quilt batting, cut 36" x 12" piece of batting. Glue to front of cornice.

4. Cut fabric strip measuring 54" x 28". Press fabric, if
needed. Center and pin fabric to cornice front; pins are
temporary and help hold fabric in place during assembly.
Carefully wrap fabric around cornice frame, neatly folding at
the corners and wrapping fabric onto the back. After cornice
is covered, glue fabric in place. If any of the cornice frame
is uncovered, cover with fabric scrap. If using pins to help
hold fabric in place on the reverse side, dip pins in glue
first, for better hold. Let glue dry.

5. Attach angle brackets to wall; slide cornice over them and pin in place.
for further information and detail tutorial, download this application now and you will have what you want.
please enjoy this tutorial and give us any feedback.
Show More

Black Desert Mobile Tags

Advertisement
Popular Apps In Last 24 Hours